foundry edition build standards
For the Foundry Edition release:
Standard Shaft: Dynamic Gold S300 (True Temper)
Standard Grip: ORE Foundry Leather — genuine leather, hand-wrapped
Length: Standard per the specification table below; custom length adjustments available
Swing Weight: Standard for Foundry Edition
Additional True Temper shaft options will be available only for reservation holders prior to the shaft order cutoff date.
Shaft selection will be finalized before production begins. Orders placed after the cutoff will default to Dynamic Gold S300.
Head-only sets are not offered for this release.
| Iron | Loft (°) | Lie (°) | Length (in) | Head Weight (g) |
|---|---|---|---|---|
| 4 | 23.0 | 61.0 | 38.5 | 250 |
| 5 | 27.0 | 61.5 | 38.0 | 257 |
| 6 | 31.0 | 62.0 | 37.5 | 264 |
| 7 | 35.0 | 62.5 | 37.0 | 271 |
| 8 | 39.0 | 63.0 | 36.5 | 278 |
| 9 | 43.0 | 63.5 | 36.0 | 285 |
| PW | 47.0 | 64.0 | 35.5 | 292 |
Reservation & Payment Terms
Reservation & Payment Terms
This purchase is a reservation deposit, not full payment.
The Foundry Edition iron set price is $999 shipped (4–PW) with the standard Dynamic Gold S300 shaft. For other shaft options, total cost increases by the amount indicated in the shaft selection portion of the order form after clicking “Reserve Your Set”
Your reservation deposit will be applied toward the final purchase price.
Reservations are fully refundable until the reservation cutoff date, at which point shaft orders are placed and production begins.
After the cutoff date, deposits become non-refundable.
Remaining balances will be invoiced prior to assembly and shipment.
Target shipment is Spring 2026.
Shaft Options (Reservation Holders Only)
The Foundry Edition offers a limited, curated selection of steel shafts chosen for consistency, control, and compatibility with a true muscle-back blade.
All options are .355 taper tip and will be finalized prior to the reservation cutoff date.
Dynamic Gold S300 is the standard shaft. Project X and Dynamic Gold Tour Issue options are available for an additional $55 per set.
| Shaft | Flex | Weight | Notes | Upcharge |
|---|---|---|---|---|
| Dynamic Gold R300 | Regular | ~127g | Smoother tempo, traditional DG feel | — |
| Dynamic Gold S300 | Stiff | ~130g | Standard Foundry Edition shaft | — |
| Dynamic Gold X100 | X-Stiff | ~130g | Higher speed, aggressive transition | — |
| DG Tour Issue S400 | Stiff+ | ~132g | Tighter weight tolerance, heavier feel | +$55 |
| DG Tour Issue X100 | X-Stiff | ~130g | Maximum stability, weight-sorted | +$55 |
| Project X 5.5 | Firm / Soft Stiff | ~115–120g | Flatter flight, linear feel | +$55 |
| Project X 6.0 | Stiff | ~120g | Stable, low spin | +$55 |
| Project X 6.5 | X-Stiff | ~125g | High speed, minimal shaft deflection | +$55 |
Key Features
One-piece forged 1020 carbon steel
True muscle-back construction — pure feedback, pure feel
Progressive mass placement for a lower, more penetrating flight
CNC-milled precision on all critical surfaces
Raw, unplated finish that patinas uniquely to you
Hand-finished detailing for crisp edges and clean transitions
Built to order. Assembled in the USA.
A True Raw Finish — No Chrome, No Plating
These are raw golf irons in the purest sense. No plating. No coatings.
Your set will:
Darken
Patina
Wear in your strike patterns
Become uniquely yours
This isn’t cosmetic — it’s performance.
Raw forged irons provide unmatched feel because there's nothing between you and the steel.
Golfers searching for raw blade irons, premium forged irons, or tour-style muscle backs will immediately recognize the difference.
Progressive Mass Flow for Controlled, Penetrating Flight
Unlike traditional blades, ORE irons place more weight higher on the back of the head, particularly in the short and mid irons.
This creates:
Lower, more controlled flight
Stable strike behavior
Exceptional spin consistency
Confidence in shaping shots both ways
In the long irons, mass shifts slightly lower to help maintain playable launch without sacrificing control.
This shaping is what gives the ORE blade its signature flight profile.
Crafted the way blades used to be — refined with modern precision.
Each head goes through a multi-stage creation:
Forged from raw 1020 carbon steel
CNC-milled for exact geometry
Hand-ground and hand-finished
Raw finish preserved — no chrome, no filler
Built to order in the USA
This combination of heritage craftsmanship and modern milling gives ORE irons the unmistakable feel of premium boutique blades.
Who ORE Irons Are Built For
These irons are created for golfers who:
Prefer feel over forgiveness
Want honest, immediate feedback
Love the challenge of a true muscle-back blade
Appreciate hand-crafted equipment
Understand that better golf comes from the truth in the strike
If you're searching for premium golf irons, forged blade irons, or minimalist players irons, you’re in the right place.
Care for Raw Forged Irons
Raw forged irons require simple upkeep:
Wipe dry after each round
Apply a light coat of oil occasionally
Expect natural rusting and darkening
Store in a dry place
Care for ORE Foundry Leather Grips
ORE Foundry Leather grips are made from genuine leather and will naturally break in and develop character with use.
Basic care is simple:
Wipe grips clean with a dry or lightly damp cloth as needed
Allow grips to dry fully before storing
Avoid prolonged exposure to excessive moisture
Periodically apply a light leather conditioner if grips begin to feel overly dry (we recommend Smith’s Leather Balm)
If wiping with a damp cloth does not restore tackiness to your satisfaction, we recommend using a pine rosin product such as Pelican Bat Wax (stick)
With normal use, the leather will soften, darken slightly, and conform to your hands. This is expected and part of the grip’s character over time.